|
تفاصيل المنتج:
|
| قوة: | 500W | تردد: | 20KHZ |
|---|---|---|---|
| مولد: | رقمي | تطبيق: | بالقطع |
| مكونات: | مولد رقمي، محول، الداعم، القرن | ||
| تسليط الضوء: | ,آلة الحفر الموجات فوق الصوتية,ultrasonic drilling machine |
||
HSK63 20khz High Vabration and Spindle Ultrasonic Assisted Machining Equipment for CNC Machining Center
Specification:
| Frequency | 20 Khz |
| Output Power | 1000 W |
| Voltage | 220 V/110V |
| Switch | Handle or foot switch |
| Power Adjusting | Step or continuous |
| Working Time Control | 24 Hours |
| Weignt | 30 KG ( Determined by the size of the horn ) |
| Generator | Digital Generator |
Ultrasonic milling is a kind of new method of process technology, is the ultrasonic vibration by adding high frequency micro-amplitude in general milling process, to change the machinable property of material. Ultrasonic milling device is constituted by generator, oscillator and horn.
Ultrasonic oscillator is the energy-gathered part to change and amplify the electric energy output by generator to mechanical energy, then pass to work piece. Ultrasonic oscillator can be designed as the structure which can clamp a certain range on the basis of requirement of practical application occasion.
Principle:
Ultrasonic machining process uses a power supply that converts conventional line voltage to 20KHz electrical energy.
This high-frequency electrical energy is provided to a piezoelectric converter that changes high frequency electrical energy into mechanical motion.
The ultrasonic motion from the converter is amplified and transmitted to the horn and cutting tool.
This causes the horn and attached cutting tool to vibrate perpendicularly to the tool face thousands of times per second with no side to side motion.
A recirculating pump forces E/Z Pump™ abrasive, suspended in a liquid medium, between the vibrating tool face and the workpiece. The abrasive particles strike the workpiece at 150,000 times their own weight.
These tiny abrasive particles chip off microscopic flakes and grind a counterpart of the tool face.
Applications:
Consumable part and working time
| Ultrasonic milling consumable part and working time | |||
| CSXX-20100-BT40 vertical milling | CSXX-20100-BT40 disk milling | ||
| consumable part | working time | consumable part | working time |
| milling cutters | 100h(8h/d) | milling cutters | 150h(8h/d) |
| carbon brush | 6000h(8h/d) | carbon brush | 8000h(8h/d) |
Work environment:
The environment: use it indoor;
Moisture: ≤85%RH;
Peripheral environment temperature: 0 ℃ - 40℃
The generator size: 450mm×300mm×135mm；
The space for use: the distance of the other objects to the power case should not be less than 150mm; to the heat dissipation port should not be less than 200mm.
HSK63 20khz High Vabration and Spindle Ultrasonic Assisted Machining Equipment for CNC Machining Center
اتصل شخص: Hogo Lv
الهاتف :: 0086-15158107730
الفاكس: 86-571-88635972
